4.111-2 THERMACOR’S CLASS A Steel Conduit systems are used for steam, condensate, and high temperature hot water system. The system is pre-fabricated and pre-engineered as a complete system that is drainable, dryable, and air testable with total manufactured components: pipes, loops, ells, tees, end seals, gland seals, and anchors. The system is built to withstand heavy traffic/earth loads, high water tables, and the most corrosive of soils.
FUSION BONDED EPOXY (FBE) is a primerless, one-part, heat curable, thermosetting powdered epoxy coating designed to provide maximum corrosion protection to pipeline systems.
Conduit Coating:
• Fusion Bonded Epoxy
Carrier Pipe:
• As Specified
Conduit:
• 6” ≤ c ≤ 26” – 10 Gauge
• 28” ≤ c ≤ 36” – 6 Gauge
• 38” ≤ c ≤ 42” – 4 Gauge
Carrier Pipe Insulations:
• As specified by engineer
Ferro-Therm SC and Copper-Therm SC are standard component piping products for above and below ground applications.
THERMACOR’S FERRO-THERM D.I. is a factory-fabricated, pre-insulated piping system for below and above ground distribution of chilled water or domestic hot water.
THERMACOR’S FERRO-THERM is a factory-fabricated, pre-insulated piping system for below ground or above ground distribution of hot water, chill water, low-pressure steam, condensate, oil and viscous fluids.
THERMACOR’S DUO-THERM “505” is a factory-fabricated, pre-insulated piping system that incorporates polyurethane foam and a rugged, non-corrosive, High Density Polyethylene (HDPE) jacket with a Class A Steel Conduit System.
Reviews
There are no reviews yet.